Homepage / Productos / Herramientas de Corte / Plaquitas / Insertos para Torneado / RCMT
Productos

RCMT

Buscar productos:

Referencias disponibles
Escalas disponibles
Milímetros
Pulgadas
  • Order Code Referencia
  • 1120384L7 PLAQUITA RCMT 0602M0-CP PH5115 INSERT RCMT 0602M0-CP PH5115 Orden
    Coating CVD-MT
    D (mm) 6
    d1 (mm) 2,8
    S (mm) 2,38
    las condiciones de corte
    P 01-30
    Vc 136-320
    446-1050
    m/min
    sfm
    Fz 0.04-0.17
    0.0016-0.0067
    mm/r
    in/r
    ap 0.50-2.40
    0.0197-0.0945
    mm
    in
    M 01-25
    Vc 130-294
    427-965
    m/min
    sfm
    Fz 0.04-0.17
    0.0016-0.0067
    mm/r
    in/r
    ap 0.50-2.40
    0.0197-0.0945
    mm
    in
    Coating CVD-MT
    D (inch) 0,2362
    d1 (inch) 0,1102
    S (inch) 0,0937
    las condiciones de corte
    P 01-30
    Vc 136-320
    446-1050
    m/min
    sfm
    Fz 0.04-0.17
    0.0016-0.0067
    mm/r
    in/r
    ap 0.50-2.40
    0.0197-0.0945
    mm
    in
    M 01-25
    Vc 130-294
    427-965
    m/min
    sfm
    Fz 0.04-0.17
    0.0016-0.0067
    mm/r
    in/r
    ap 0.50-2.40
    0.0197-0.0945
    mm
    in
  • 1120384L8 PLAQUITA RCMT 0602M0-CP PH5125 INSERT RCMT 0602M0-CP PH5125 Orden
    Coating CVD-MT
    D (mm) 6
    d1 (mm) 2,8
    S (mm) 2,38
    las condiciones de corte
    P 10-35
    Vc 127-290
    417-951
    m/min
    sfm
    Fz 0.04-0.17
    0.0016-0.0067
    mm/r
    in/r
    ap 0.50-2.40
    0.0197-0.0945
    mm
    in
    M 05-30
    Vc 121-267
    397-876
    m/min
    sfm
    Fz 0.04-0.17
    0.0016-0.0067
    mm/r
    in/r
    ap 0.50-2.40
    0.0197-0.0945
    mm
    in
    Coating CVD-MT
    D (inch) 0,2362
    d1 (inch) 0,1102
    S (inch) 0,0937
    las condiciones de corte
    P 10-35
    Vc 127-290
    417-951
    m/min
    sfm
    Fz 0.04-0.17
    0.0016-0.0067
    mm/r
    in/r
    ap 0.50-2.40
    0.0197-0.0945
    mm
    in
    M 05-30
    Vc 121-267
    397-876
    m/min
    sfm
    Fz 0.04-0.17
    0.0016-0.0067
    mm/r
    in/r
    ap 0.50-2.40
    0.0197-0.0945
    mm
    in
  • 1120384L5 PLAQUITA RCMT 0602M0-CP PH5705 INSERT RCMT 0602M0-CP PH5705 Orden
    Coating CVD-MT
    D (mm) 6
    d1 (mm) 2,8
    S (mm) 2,38
    las condiciones de corte
    K 05-15
    Vc 179-403
    587-1322
    m/min
    sfm
    Fz 0.04-0.17
    0.0016-0.0067
    mm/r
    in/r
    ap 0.50-2.40
    0.0197-0.0945
    mm
    in
    Coating CVD-MT
    D (inch) 0,2362
    d1 (inch) 0,1102
    S (inch) 0,0937
    las condiciones de corte
    K 05-15
    Vc 179-403
    587-1322
    m/min
    sfm
    Fz 0.04-0.17
    0.0016-0.0067
    mm/r
    in/r
    ap 0.50-2.40
    0.0197-0.0945
    mm
    in
  • 1120385L7 PLAQUITA RCMT 0803M0-ST PH5115 INSERT RCMT 0803M0-ST PH5115 Orden
    Coating CVD-MT
    D (mm) 8
    d1 (mm) 3,4
    S (mm) 3,18
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997
    m/min
    sfm
    Fz 0.05-0.25
    0.002-0.0098
    mm/r
    in/r
    ap 0.80-3.20
    0.0315-0.126
    mm
    in
    M 01-25
    Vc 126-280
    413-919
    m/min
    sfm
    Fz 0.05-0.25
    0.002-0.0098
    mm/r
    in/r
    ap 0.80-3.20
    0.0315-0.126
    mm
    in
    Coating CVD-MT
    D (inch) 0,315
    d1 (inch) 0,1339
    S (inch) 0,1252
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997
    m/min
    sfm
    Fz 0.05-0.25
    0.002-0.0098
    mm/r
    in/r
    ap 0.80-3.20
    0.0315-0.126
    mm
    in
    M 01-25
    Vc 126-280
    413-919
    m/min
    sfm
    Fz 0.05-0.25
    0.002-0.0098
    mm/r
    in/r
    ap 0.80-3.20
    0.0315-0.126
    mm
    in
  • 1120385L8 PLAQUITA RCMT 0803M0-ST PH5125 INSERT RCMT 0803M0-ST PH5125 Orden
    Coating CVD-MT
    D (mm) 8
    d1 (mm) 3,4
    S (mm) 3,18
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906
    m/min
    sfm
    Fz 0.05-0.25
    0.002-0.0098
    mm/r
    in/r
    ap 0.80-3.20
    0.0315-0.126
    mm
    in
    M 05-30
    Vc 117-253
    384-830
    m/min
    sfm
    Fz 0.05-0.25
    0.002-0.0098
    mm/r
    in/r
    ap 0.80-3.20
    0.0315-0.126
    mm
    in
    Coating CVD-MT
    D (inch) 0,315
    d1 (inch) 0,1339
    S (inch) 0,1252
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906
    m/min
    sfm
    Fz 0.05-0.25
    0.002-0.0098
    mm/r
    in/r
    ap 0.80-3.20
    0.0315-0.126
    mm
    in
    M 05-30
    Vc 117-253
    384-830
    m/min
    sfm
    Fz 0.05-0.25
    0.002-0.0098
    mm/r
    in/r
    ap 0.80-3.20
    0.0315-0.126
    mm
    in
  • 1120385L5 PLAQUITA RCMT 0803M0-ST PH5705 INSERT RCMT 0803M0-ST PH5705 Orden
    Coating CVD-MT
    D (mm) 8
    d1 (mm) 3,4
    S (mm) 3,18
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253
    m/min
    sfm
    Fz 0.05-0.25
    0.002-0.0098
    mm/r
    in/r
    ap 0.80-3.20
    0.0315-0.126
    mm
    in
    Coating CVD-MT
    D (inch) 0,315
    d1 (inch) 0,1339
    S (inch) 0,1252
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253
    m/min
    sfm
    Fz 0.05-0.25
    0.002-0.0098
    mm/r
    in/r
    ap 0.80-3.20
    0.0315-0.126
    mm
    in
  • 1120386L7 PLAQUITA RCMT 1003M0-ST PH5115 INSERT RCMT 1003M0-ST PH5115 Orden
    Coating CVD-MT
    D (mm) 10
    d1 (mm) 4,4
    S (mm) 3,18
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    M 01-25
    Vc 126-280
    413-919
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    Coating CVD-MT
    D (inch) 0,3937
    d1 (inch) 0,1732
    S (inch) 0,1252
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    M 01-25
    Vc 126-280
    413-919
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
  • 1120386L8 PLAQUITA RCMT 1003M0-ST PH5125 INSERT RCMT 1003M0-ST PH5125 Orden
    Coating CVD-MT
    D (mm) 10
    d1 (mm) 4,4
    S (mm) 3,18
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    M 05-30
    Vc 117-253
    384-830
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    Coating CVD-MT
    D (inch) 0,3937
    d1 (inch) 0,1732
    S (inch) 0,1252
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    M 05-30
    Vc 117-253
    384-830
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
  • 1120386L5 PLAQUITA RCMT 1003M0-ST PH5705 INSERT RCMT 1003M0-ST PH5705 Orden
    Coating CVD-MT
    D (mm) 10
    d1 (mm) 4,4
    S (mm) 3,18
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    Coating CVD-MT
    D (inch) 0,3937
    d1 (inch) 0,1732
    S (inch) 0,1252
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
  • 1120387L7 PLAQUITA RCMT 10T3M0-ST PH5115 INSERT RCMT 10T3M0-ST PH5115 Orden
    Coating CVD-MT
    D (mm) 10
    d1 (mm) 4,4
    S (mm) 3,97
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    M 01-25
    Vc 126-280
    413-919
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    Coating CVD-MT
    D (inch) 0,3937
    d1 (inch) 0,1732
    S (inch) 0,1563
    las condiciones de corte
    P 01-30
    Vc 132-304
    433-997
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    M 01-25
    Vc 126-280
    413-919
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
  • 1120387L8 PLAQUITA RCMT 10T3M0-ST PH5125 INSERT RCMT 10T3M0-ST PH5125 Orden
    Coating CVD-MT
    D (mm) 10
    d1 (mm) 4,4
    S (mm) 3,97
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    M 05-30
    Vc 117-253
    384-830
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    Coating CVD-MT
    D (inch) 0,3937
    d1 (inch) 0,1732
    S (inch) 0,1563
    las condiciones de corte
    P 10-35
    Vc 123-276
    404-906
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    M 05-30
    Vc 117-253
    384-830
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
  • 1120387L5 PLAQUITA RCMT 10T3M0-ST PH5705 INSERT RCMT 10T3M0-ST PH5705 Orden
    Coating CVD-MT
    D (mm) 10
    d1 (mm) 4,4
    S (mm) 3,97
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
    Coating CVD-MT
    D (inch) 0,3937
    d1 (inch) 0,1732
    S (inch) 0,1563
    las condiciones de corte
    K 05-15
    Vc 173-382
    568-1253
    m/min
    sfm
    Fz 0.06-0.32
    0.0024-0.0126
    mm/r
    in/r
    ap 1.00-4.00
    0.0394-0.1575
    mm
    in
  • 1120388L7 PLAQUITA RCMT 1204M0-ST PH5115 INSERT RCMT 1204M0-ST PH5115 Orden
    Coating CVD-MT
    D (mm) 12
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 01-30
    Vc 130-304
    427-997
    m/min
    sfm
    Fz 0.08-0.38
    0.0031-0.015
    mm/r
    in/r
    ap 1.20-4.80
    0.0472-0.189
    mm
    in
    M 01-25
    Vc 123-280
    404-919
    m/min
    sfm
    Fz 0.08-0.38
    0.0031-0.015
    mm/r
    in/r
    ap 1.20-4.80
    0.0472-0.189
    mm
    in
    Coating CVD-MT
    D (inch) 0,4724
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 01-30
    Vc 130-304
    427-997
    m/min
    sfm
    Fz 0.08-0.38
    0.0031-0.015
    mm/r
    in/r
    ap 1.20-4.80
    0.0472-0.189
    mm
    in
    M 01-25
    Vc 123-280
    404-919
    m/min
    sfm
    Fz 0.08-0.38
    0.0031-0.015
    mm/r
    in/r
    ap 1.20-4.80
    0.0472-0.189
    mm
    in
  • 1120388L8 PLAQUITA RCMT 1204M0-ST PH5125 INSERT RCMT 1204M0-ST PH5125 Orden
    Coating CVD-MT
    D (mm) 12
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    P 10-35
    Vc 121-276
    397-906
    m/min
    sfm
    Fz 0.08-0.38
    0.0031-0.015
    mm/r
    in/r
    ap 1.20-4.80
    0.0472-0.189
    mm
    in
    M 05-30
    Vc 115-253
    377-830
    m/min
    sfm
    Fz 0.08-0.38
    0.0031-0.015
    mm/r
    in/r
    ap 1.20-4.80
    0.0472-0.189
    mm
    in
    Coating CVD-MT
    D (inch) 0,4724
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    P 10-35
    Vc 121-276
    397-906
    m/min
    sfm
    Fz 0.08-0.38
    0.0031-0.015
    mm/r
    in/r
    ap 1.20-4.80
    0.0472-0.189
    mm
    in
    M 05-30
    Vc 115-253
    377-830
    m/min
    sfm
    Fz 0.08-0.38
    0.0031-0.015
    mm/r
    in/r
    ap 1.20-4.80
    0.0472-0.189
    mm
    in
  • 1120388L5 PLAQUITA RCMT 1204M0-ST PH5705 INSERT RCMT 1204M0-ST PH5705 Orden
    Coating CVD-MT
    D (mm) 12
    d1 (mm) 4,4
    S (mm) 4,76
    las condiciones de corte
    K 05-15
    Vc 170-382
    558-1253
    m/min
    sfm
    Fz 0.08-0.38
    0.0031-0.015
    mm/r
    in/r
    ap 1.20-4.80
    0.0472-0.189
    mm
    in
    Coating CVD-MT
    D (inch) 0,4724
    d1 (inch) 0,1732
    S (inch) 0,1874
    las condiciones de corte
    K 05-15
    Vc 170-382
    558-1253
    m/min
    sfm
    Fz 0.08-0.38
    0.0031-0.015
    mm/r
    in/r
    ap 1.20-4.80
    0.0472-0.189
    mm
    in
  • 1120389L7 PLAQUITA RCMT 1606M0-ST PH5115 INSERT RCMT 1606M0-ST PH5115 Orden
    Coating CVD-MT
    D (mm) 16
    d1 (mm) 5,5
    S (mm) 6,35
    las condiciones de corte
    P 01-30
    Vc 127-304
    417-997
    m/min
    sfm
    Fz 0.10-0.51
    0.0039-0.0201
    mm/r
    in/r
    ap 1.60-6.40
    0.063-0.252
    mm
    in
    M 01-25
    Vc 121-280
    397-919
    m/min
    sfm
    Fz 0.10-0.51
    0.0039-0.0201
    mm/r
    in/r
    ap 1.60-6.40
    0.063-0.252
    mm
    in
    Coating CVD-MT
    D (inch) 0,6299
    d1 (inch) 0,2165
    S (inch) 0,25
    las condiciones de corte
    P 01-30
    Vc 127-304
    417-997
    m/min
    sfm
    Fz 0.10-0.51
    0.0039-0.0201
    mm/r
    in/r
    ap 1.60-6.40
    0.063-0.252
    mm
    in
    M 01-25
    Vc 121-280
    397-919
    m/min
    sfm
    Fz 0.10-0.51
    0.0039-0.0201
    mm/r
    in/r
    ap 1.60-6.40
    0.063-0.252
    mm
    in
  • 1120389L8 PLAQUITA RCMT 1606M0-ST PH5125 INSERT RCMT 1606M0-ST PH5125 Orden
    Coating CVD-MT
    D (mm) 16
    d1 (mm) 5,5
    S (mm) 6,35
    las condiciones de corte
    P 10-35
    Vc 118-276
    387-906
    m/min
    sfm
    Fz 0.10-0.51
    0.0039-0.0201
    mm/r
    in/r
    ap 1.60-6.40
    0.063-0.252
    mm
    in
    M 05-30
    Vc 112-253
    367-830
    m/min
    sfm
    Fz 0.10-0.51
    0.0039-0.0201
    mm/r
    in/r
    ap 1.60-6.40
    0.063-0.252
    mm
    in
    Coating CVD-MT
    D (inch) 0,6299
    d1 (inch) 0,2165
    S (inch) 0,25
    las condiciones de corte
    P 10-35
    Vc 118-276
    387-906
    m/min
    sfm
    Fz 0.10-0.51
    0.0039-0.0201
    mm/r
    in/r
    ap 1.60-6.40
    0.063-0.252
    mm
    in
    M 05-30
    Vc 112-253
    367-830
    m/min
    sfm
    Fz 0.10-0.51
    0.0039-0.0201
    mm/r
    in/r
    ap 1.60-6.40
    0.063-0.252
    mm
    in
  • 1120389L5 PLAQUITA RCMT 1606M0-ST PH5705 INSERT RCMT 1606M0-ST PH5705 Orden
    Coating CVD-MT
    D (mm) 16
    d1 (mm) 5,5
    S (mm) 6,35
    las condiciones de corte
    K 05-15
    Vc 166-382
    545-1253
    m/min
    sfm
    Fz 0.10-0.51
    0.0039-0.0201
    mm/r
    in/r
    ap 1.60-6.40
    0.063-0.252
    mm
    in
    Coating CVD-MT
    D (inch) 0,6299
    d1 (inch) 0,2165
    S (inch) 0,25
    las condiciones de corte
    K 05-15
    Vc 166-382
    545-1253
    m/min
    sfm
    Fz 0.10-0.51
    0.0039-0.0201
    mm/r
    in/r
    ap 1.60-6.40
    0.063-0.252
    mm
    in
  • 1123856L7 PLAQUITA RCMT 2006M0-RM PH5115 INSERT RCMT 2006M0-RM PH5115 Orden
  • 1120390L7 PLAQUITA RCMT 2006M0-ST PH5115 INSERT RCMT 2006M0-ST PH5115 Orden
    Coating CVD-MT
    D (mm) 20
    d1 (mm) 6,5
    S (mm) 6,35
    las condiciones de corte
    P 01-30
    Vc 127-304
    417-997
    m/min
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
    M 01-25
    Vc 121-280
    397-919
    m/min
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
    Coating CVD-MT
    D (inch) 0,7874
    d1 (inch) 0,2559
    S (inch) 0,25
    las condiciones de corte
    P 01-30
    Vc 127-304
    417-997
    m/min
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
    M 01-25
    Vc 121-280
    397-919
    m/min
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
  • 1120390L8 PLAQUITA RCMT 2006M0-ST PH5125 INSERT RCMT 2006M0-ST PH5125 Orden
    Coating CVD-MT
    D (mm) 20
    d1 (mm) 6,5
    S (mm) 6,35
    las condiciones de corte
    P 10-35
    Vc 118-276
    387-906
    m/min
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
    M 05-30
    Vc 112-253
    367-830
    m/min
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
    Coating CVD-MT
    D (inch) 0,7874
    d1 (inch) 0,2559
    S (inch) 0,25
    las condiciones de corte
    P 10-35
    Vc 118-276
    387-906
    m/min
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
    M 05-30
    Vc 112-253
    367-830
    m/min
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
  • 1120390L6 PLAQUITA RCMT 2006M0-ST PH5320 INSERT RCMT 2006M0-ST PH5320 Orden
    Coating Coating
    d1 (mm) d1 (mm)
    D (mm) D (mm)
    S (mm) S (mm)
    las condiciones de corte
    P 01-30
    Vc 140-320
    459-1050
    m/min.
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
    M 01-25
    Vc 130-310
    443-968
    m/min.
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
    Coating Coating
    S (inch) S (inch)
    D (inch) D (inch)
    d1 (inch) d1 (inch)
    las condiciones de corte
    P 01-30
    Vc 140-320
    459-1050
    m/min.
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
    M 01-25
    Vc 130-310
    443-968
    m/min.
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
  • 1120390L5 PLAQUITA RCMT 2006M0-ST PH5705 INSERT RCMT 2006M0-ST PH5705 Orden
    Coating CVD-MT
    D (mm) 20
    d1 (mm) 6,5
    S (mm) 6,35
    las condiciones de corte
    K 05-15
    Vc 166-382
    545-1253
    m/min
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
    Coating CVD-MT
    D (inch) 0,7874
    d1 (inch) 0,2559
    S (inch) 0,25
    las condiciones de corte
    K 05-15
    Vc 166-382
    545-1253
    m/min
    sfm
    Fz 0.13-0.63
    0.0051-0.0248
    mm/r
    in/r
    ap 2.00-8.00
    0.0787-0.315
    mm
    in
Para entrar en contacto con nuestros representantes
El correo electrónico no es válido