Homepage / Productos / Herramientas de Corte / Plaquitas / Milling inserts / ONHX
Productos

ONHX

Buscar productos:

Referencias disponibles
Escalas disponibles
Milímetros
Pulgadas
  • Order Code Referencia
  • 1111954N9 PLAQUITA ONHX 0606 ANEN-LP PH5325 INSERT ONHX 0606 ANEN-LP PH5325 Orden
    IC (mm) 16.5
    S (mm) 6.0
    l (mm) 6.2
    R (mm) 0.8
    F (mm) 1.0
    Z efective cutting edge 16
    Tolerance Class Insert H
    Cutting Rake (°) 20
    Coating MT-CVD
    ISO Field K
    Work hand R;L
    las condiciones de corte
    K 10-30
    Vc 140-260 m/min
    Fz 0.10-0.35 mm/t
    ap 1.00-3.00 mm
    IC (inch) 0.650
    S (inch) 0.236
    l (inch) 0.244
    R (inch) 0.8
    F (inch) 0.039
    Z efective cutting edge 16
    Tolerance Class Insert H
    Cutting Rake (°) 20
    Coating MT-CVD
    ISO Field K
    Work hand R;L
    las condiciones de corte
    K 10-30
    Vc 140-260 m/min
    Fz 0.10-0.35 mm/t
    ap 1.00-3.00 mm
  • 1111954I5 PLAQUITA ONHX 0606 ANEN-LP PH6740 INSERT ONHX 0606 ANEN-LP PH6740 Orden
    IC (mm) 16.5
    S (mm) 6.0
    l (mm) 6.2
    L (mm)
    R (mm) 0.8
    a (mm)
    F (mm) 1.0
    Z efective cutting edge 16
    Tolerance Class Insert H
    Cutting Rake (°) 20
    Coating PVD
    ISO Field P;M;K
    Work hand R;L
    las condiciones de corte
    P 30-50
    Vc 100-160 m/min
    Fz 0.10-0.25 mm/t
    ap
    M 30-50
    Vc 70-140 m/min
    Fz 0.10-0.25 mm/t
    ap
    K 30-40
    Vc 120-200 m/min
    Fz 0.10-0.30 mm/t
    ap
    IC (inch) 0.650
    S (inch) 0.236
    l (inch) 0.244
    L (inch)
    R (inch) 0.031
    a (inch)
    F (inch) 0.039
    Z efective cutting edge 16
    Tolerance Class Insert H
    Cutting Rake (°) 20
    Coating PVD
    ISO Field P;M;K
    Work hand R;L
    las condiciones de corte
    P 30-50
    Vc 100-160 m/min
    Fz 0.10-0.25 mm/t
    ap
    M 30-50
    Vc 70-140 m/min
    Fz 0.10-0.25 mm/t
    ap
    K 30-40
    Vc 120-200 m/min
    Fz 0.10-0.30 mm/t
    ap
  • 111195468 PLAQUITA ONHX 0606 ANEN-LP PH6920 INSERT ONHX 0606 ANEN-LP PH6920 Orden
    IC (mm) 16.5
    S (mm) 6.0
    l (mm) 6.2
    R (mm) 0.8
    F (mm) 1.0
    Z efective cutting edge 16
    Tolerance Class Insert H
    Cutting Rake (°) 25
    Coating PVD
    ISO Field P;M;K
    Work hand L;R
    las condiciones de corte
    P 10-35
    Vc 140-210
    Fz 0.10-0.30 mm/t
    ap 1.00-3.50 mm
    M 10-25
    Vc 100-190
    Fz 0.10-0.30 mm/t
    ap 1.00-3.50 mm
    K 10-30
    Vc 90-250
    Fz 0.10-0.30 mm/t
    ap 1.00-3.50 mm
    IC (inch) 0.650
    S (inch) 0.236
    l (inch) 0.244
    R (inch) 0.031
    F (inch) 0.039
    Z efective cutting edge 16
    Tolerance Class Insert H
    Cutting Rake (°) 25
    Coating PVD
    ISO Field P;M;K
    Work hand L;R
    las condiciones de corte
    P 10-35
    Vc 140-210
    Fz 0.10-0.30 mm/t
    ap 1.00-3.50 mm
    M 10-25
    Vc 100-190
    Fz 0.10-0.30 mm/t
    ap 1.00-3.50 mm
    K 10-30
    Vc 90-250
    Fz 0.10-0.30 mm/t
    ap 1.00-3.50 mm
  • 1111954G6 PLAQUITA ONHX 0606 ANEN-LP PH7740 INSERT ONHX 0606 ANEN-LP PH7740 Orden
  • 1111954G4 PLAQUITA ONHX 0606 ANEN-LP PH7920 INSERT ONHX 0606 ANEN-LP PH7920 Orden
  • 1111954P3 PLAQUITA ONHX 0606 ANEN-LP PH7930 INSERT ONHX 0606 ANEN-LP PH7930 Orden
  • 1111956L5 PLAQUITA ONHX 0606 ANEN-MK PH5705 INSERT ONHX 0606 ANEN-MK PH5705 Orden
    IC (mm) 16.5
    S (mm) 6.0
    l (mm) 6.2
    R (mm) 0.8
    F (mm) 1.0
    Z efective cutting edge 16
    Tolerance Class Insert H
    Cutting Rake (°) 10
    Coating MT-CVD
    ISO Field K
    Work hand R;L
    las condiciones de corte
    K 05-15
    Vc 160-350 m/min
    Fz 0.15-0.3 mm/t
    ap 1.0-3.5 mm
    IC (inch) 0.650
    S (inch) 0.236
    l (inch) 0.244
    R (inch) 0.031
    F (inch) 0.039
    Z efective cutting edge 16
    Tolerance Class Insert H
    Cutting Rake (°) 10
    Coating MT-CVD
    ISO Field K
    Work hand R;L
    las condiciones de corte
    K 05-15
    Vc 160-350 m/min
    Fz 0.15-0.3 mm/t
    ap 1.0-3.5 mm
  • 1111956L9 PLAQUITA ONHX 0606 ANEN-MK PH5740 INSERT ONHX 0606 ANEN-MK PH5740 Orden
    IC (mm) 16.5
    S (mm) 6.0
    l (mm) 6.2
    R (mm) 0.8
    F (mm) 1.0
    Z efective cutting edge 16
    Tolerance Class Insert H
    Cutting Rake (°) 10
    Coating MT-CVD
    ISO Field K
    Work hand R;L
    las condiciones de corte
    K 30-40
    Vc 120-260 m/min
    Fz 0.10-0.35 mm/t
    ap 1.00-3.50 mm
    IC (inch) 0.650
    S (inch) 0.236
    l (inch) 0.244
    R (inch) 0.031
    F (inch) 0.039
    Z efective cutting edge 16
    Tolerance Class Insert H
    Cutting Rake (°) 10
    Coating MT-CVD
    ISO Field K
    Work hand R;L
    las condiciones de corte
    K 30-40
    Vc 120-260 m/min
    Fz 0.10-0.35 mm/t
    ap 1.00-3.50 mm
  • 1111955I5 PLAQUITA ONHX 0606 ANEN-MP PH6740 INSERT ONHX 0606 ANEN-MP PH6740 Orden
    IC (mm) 16.5
    S (mm) 6.0
    l (mm) 6.2
    L (mm)
    R (mm) 0.8
    a (mm)
    F (mm) 1.0
    Z efective cutting edge 8
    Tolerance Class Insert H
    Cutting Rake (°) 15
    Coating PVD
    ISO Field P;K
    Work hand R;L
    las condiciones de corte
    P 30-50
    Vc 120-180 m/min
    Fz 0.15-0.25 mm/t
    ap 1.00-3.00 mm
    IC (inch) 0.650
    S (inch) 0.236
    l (inch) 0.244
    L (inch)
    R (inch) 0.031
    a (inch)
    F (inch) 0.039
    Z efective cutting edge 8
    Tolerance Class Insert H
    Cutting Rake (°) 15
    Coating PVD
    ISO Field P;K
    Work hand R;L
    las condiciones de corte
    P 30-50
    Vc 120-180 m/min
    Fz 0.15-0.25 mm/t
    ap 1.00-3.00 mm
  • 111195568 PLAQUITA ONHX 0606 ANEN-MP PH6920 INSERT ONHX 0606 ANEN-MP PH6920 Orden
    IC (mm) 16.5
    S (mm) 6.0
    l (mm) 6.2
    R (mm) 0.8
    F (mm) 1.0
    Z efective cutting edge 16
    Tolerance Class Insert H
    Cutting Rake (°) 20
    Coating PVD
    ISO Field P
    Work hand L;R
    las condiciones de corte
    P 10-35
    Vc 140-210 m/min
    Fz 0.10-0.35 mm/t
    ap
    M 10-25
    Vc 100-190 m/min
    Fz 0.10-0.35 mm/t
    ap
    IC (inch) 0.650
    S (inch) 0.236
    l (inch) 0.244
    R (inch) 0.031
    F (inch) 0.039
    Z efective cutting edge 16
    Tolerance Class Insert H
    Cutting Rake (°) 20
    Coating PVD
    ISO Field P
    Work hand L;R
    las condiciones de corte
    P 10-35
    Vc 140-210 m/min
    Fz 0.10-0.35 mm/t
    ap
    M 10-25
    Vc 100-190 m/min
    Fz 0.10-0.35 mm/t
    ap
  • 1111955G6 PLAQUITA ONHX 0606 ANEN-MP PH7740 INSERT ONHX 0606 ANEN-MP PH7740 Orden
  • 1111955G4 PLAQUITA ONHX 0606 ANEN-MP PH7920 INSERT ONHX 0606 ANEN-MP PH7920 Orden
  • 1112053L5 PLAQUITA ONHX 0606 ANEN-W PH5705 INSERT ONHX 0606 ANEN-W PH5705 Orden
    IC (mm) 16.5
    S (mm) 6.0
    l (mm) 6.2
    F (mm) 6.0
    Z efective cutting edge 16
    Tolerance Class Insert H
    Coating MT-CVD
    ISO Field P;K
    Work hand R;L
    las condiciones de corte
    K 05-15
    Vc 180-330 m/min
    Fz 0.10-0.30 mm/t
    ap 0.50-0.80 mm
    IC (inch) 6.0
    S (inch) 0.236
    l (inch) 0.244
    F (inch) 0.236
    Z efective cutting edge 16
    Tolerance Class Insert H
    Coating MT-CVD
    ISO Field P;K
    Work hand R;L
    las condiciones de corte
    K 05-15
    Vc 180-330 m/min
    Fz 0.10-0.30 mm/t
    ap 0.50-0.80 mm
  • 111205368 PLAQUITA ONHX 0606 ANEN-W PH6920 INSERT ONHX 0606 ANEN-W PH6920 Orden
    IC (mm) 16.5
    S (mm) 6.0
    l (mm) 6.2
    F (mm) 6.0
    Z efective cutting edge 16
    Tolerance Class Insert H
    Coating PVD
    ISO Field P;K
    Work hand R;L
    las condiciones de corte
    P 10-35
    Vc 160-220 m/min
    Fz 0.10-0.35 mm/t
    ap 0.50-1.00 mm
    K 10-30
    Vc 140-260 m/min
    Fz 0.10-0.35 mm/t
    ap 0.50-1.00 mm
    IC (inch) 0.650
    S (inch) 0.236
    l (inch) 0.244
    F (inch) 0.236
    Z efective cutting edge 16
    Tolerance Class Insert H
    Coating PVD
    ISO Field P;K
    Work hand R;L
    las condiciones de corte
    P 10-35
    Vc 160-220 m/min
    Fz 0.10-0.35 mm/t
    ap 0.50-1.00 mm
    K 10-30
    Vc 140-260 m/min
    Fz 0.10-0.35 mm/t
    ap 0.50-1.00 mm
  • 1112053G4 PLAQUITA ONHX 0606 ANEN-W PH7920 INSERT ONHX 0606 ANEN-W PH7920 Orden
Para entrar en contacto con nuestros representantes
El correo electrónico no es válido