Homepage / Productos / Herramientas de Corte / Plaquitas / Milling inserts / ANHX
Productos

ANHX

Buscar productos:

Referencias disponibles
Escalas disponibles
Milímetros
Pulgadas
  • Order Code Referencia
  • 1112005I5 PLAQUITA ANHX 100405 PNER-LM PH6740 INSERT ANHX 100405 PNER LM PH6740 Orden
    IC (mm) 6.6
    S (mm) 6.2
    l (mm) 10
    R (mm) 0.5
    F (mm) 1.0
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 26
    Coating PVD
    ISO Field P;M
    Work hand R
    las condiciones de corte
    P 30-50
    Vc 120-180 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-5.00 mm
    M 30-50
    Vc 100-160 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-5.00 mm
    IC (inch) 0.260
    S (inch) 0.244
    l (inch) 0.394
    R (inch) 0.020
    F (inch) 0.039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 26
    Coating PVD
    ISO Field P;M
    Work hand R
    las condiciones de corte
    P 30-50
    Vc 120-180 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-5.00 mm
    M 30-50
    Vc 100-160 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-5.00 mm
  • 111200568 PLAQUITA ANHX 100405 PNER-LM PH6920 INSERT ANHX 100405 PNER LM PH6920 Orden
    IC (mm) 6.6
    S (mm) 6.2
    l (mm) 10
    L (mm)
    R (mm) 0.5
    a (mm)
    F (mm) 1.0
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 26
    Coating PVD
    ISO Field P;M
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 120-200 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-4.00 mm
    M 10-25
    Vc 100-180 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-4.00 mm
    IC (inch) 0.260
    S (inch) 0.244
    l (inch) 0.394
    L (inch)
    R (inch) 0.020
    a (inch)
    F (inch) 0.039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 26
    Coating PVD
    ISO Field P;M
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 120-200 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-4.00 mm
    M 10-25
    Vc 100-180 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-4.00 mm
  • 1112005G6 PLAQUITA ANHX 100405 PNER-LM PH7740 INSERT ANHX 100405 PNER LM PH7740 Orden
  • 1112005G4 PLAQUITA ANHX 100405 PNER-LM PH7920 INSERT ANHX 100405 PNER LM PH7920 Orden
  • 1112005P3 PLAQUITA ANHX 100405 PNER-LM PH7930 INSERT ANHX 100405 PNER LM PH7930 Orden
  • 111199710 PLAQUITA ANHX 100405 PNFR-LN PH0910 INSERT ANHX 100405 PNFR-LN PH0910 Orden
  • 111165254 PLAQUITA ANHX 100405 PNR-LP PH6910 INSERT ANHX 100405 PNR-LP PH6910 Orden
    IC (mm) 6,6
    S (mm) 6,2
    l (mm) 10
    R (mm) 0,5
    F (mm) 1
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 160-230 m/min
    Fz 0.10-0.20 mm/t
    ap
    K 05-10
    Vc 100-260 m/min
    Fz 0.10-0.20 mm/t
    ap
    IC (inch) 0,260
    S (inch) 0,244
    l (inch) 0,394
    R (inch) 0,020
    F (inch) 0,039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 160-230 m/min
    Fz 0.10-0.20 mm/t
    ap
    K 05-10
    Vc 100-260 m/min
    Fz 0.10-0.20 mm/t
    ap
  • 111165268 PLAQUITA ANHX 100405 PNR-LP PH6920 INSERT ANHX 100405 PNR-LP PH6920 Orden
    IC (mm) 6,6
    S (mm) 6,2
    l (mm) 10
    R (mm) 0,5
    F (mm) 1
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 10-35 m/min
    Fz 0.1-0.20 mm/t
    ap 1.00-3.50 mm
    K 10-30
    Vc 10-30 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-3.50 mm
    IC (inch) 0,260
    S (inch) 0,244
    l (inch) 0,394
    R (inch) 0,020
    F (inch) 0,039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 10-35 m/min
    Fz 0.1-0.20 mm/t
    ap 1.00-3.50 mm
    K 10-30
    Vc 10-30 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-3.50 mm
  • 111165266 PLAQUITA ANHX 100405 PNR-LP PH6930 INSERT ANHX 100405 PNR-LP PH6930 Orden
    IC (mm) 6,6
    S (mm) 6,2
    l (mm) 10
    R (mm) 0,5
    F (mm) 1
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,M,K
    Work hand R
    las condiciones de corte
    P 20-40
    Vc 120-220 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-3.00 mm
    K 20-40
    Vc 100-260 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-3.00 mm
    IC (inch) 0,260
    S (inch) 0,244
    l (inch) 0,394
    R (inch) 0,020
    F (inch) 0,039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,M,K
    Work hand R
    las condiciones de corte
    P 20-40
    Vc 120-220 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-3.00 mm
    K 20-40
    Vc 100-260 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-3.00 mm
  • 1111652G1 PLAQUITA ANHX 100405 PNR-LP PH7910 INSERT ANHX 100405 PNR-LP PH7910 Orden
    IC (mm) 6,6
    S (mm) 6,2
    l (mm) 10
    R (mm) 0,5
    F (mm) 1
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 150-260 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-3.50 mm
    K 05-10
    Vc 140-280 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-3.50 mm
    IC (inch) 0,260
    S (inch) 0,244
    l (inch) 0,394
    R (inch) 0,020
    F (inch) 0,039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 150-260 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-3.50 mm
    K 05-10
    Vc 140-280 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-3.50 mm
  • 1111652G4 PLAQUITA ANHX 100405 PNR-LP PH7920 INSERT ANHX 100405 PNR-LP PH7920 Orden
    IC (mm) 6,6
    S (mm) 6,2
    l (mm) 10
    R (mm) 0,5
    F (mm) 1
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc
    Fz
    ap
    M 10-25
    Vc
    Fz
    ap
    K 10-30
    Vc
    Fz
    ap
    IC (inch) 0,260
    S (inch) 0,244
    l (inch) 0,394
    R (inch) 0,020
    F (inch) 0,039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc
    Fz
    ap
    M 10-25
    Vc
    Fz
    ap
    K 10-30
    Vc
    Fz
    ap
  • 1111652P3 PLAQUITA ANHX 100405 PNR-LP PH7930 INSERT ANHX 100405 PNR-LP PH7930 Orden
  • 1112162P3 PLAQUITA ANHX 100408 PNER-LM PH7930 PLAQUITA ANHX 100408 PNER-LM PH7930 Orden
  • 1112106P3 PLAQUITA ANHX 100408 PNR-LP PH7930 PLAQUITA ANHX 100408 PNR-LP PH7930 Orden
  • 1112103I5 PLAQUITA ANHX 100412 PNER-LM PH6740 INSERT ANHX 100412 PNER-LM PH6740 Orden
    IC (mm) 6.6
    S (mm) 6.2
    l (mm) 10
    R (mm) 1.2
    F (mm) 1.0
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 26
    Coating PVD
    ISO Field P;M
    Work hand R
    las condiciones de corte
    P 30-50
    Vc 120-180 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-5.00 mm
    M 30-50
    Vc 100-140 m/min
    Fz 0.10-0.15 mm/t
    ap 1.00-5.00 mm
    K 30-40
    Vc 80-160 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-5.00 mm
    IC (inch) 0.260
    S (inch) 0.244
    l (inch) 0.394
    R (inch) 0.047
    F (inch) 0.039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 26
    Coating PVD
    ISO Field P;M
    Work hand R
    las condiciones de corte
    P 30-50
    Vc 120-180 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-5.00 mm
    M 30-50
    Vc 100-140 m/min
    Fz 0.10-0.15 mm/t
    ap 1.00-5.00 mm
    K 30-40
    Vc 80-160 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-5.00 mm
  • 111210368 PLAQUITA ANHX 100412 PNER-LM PH6920 INSERT ANHX 100412 PNER-LM PH6920 Orden
    IC (mm) 6.6
    S (mm) 6.2
    l (mm) 10
    R (mm) 1.2
    F (mm) 1.0
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 26
    Coating PVD
    ISO Field P;M
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 140-220 m/min
    Fz 0.10-0.25 mm/t
    ap
    M 10-25
    Vc 100-160 m/min
    Fz 0.10-0.20 mm/t
    ap
    k 10-30
    Vc 160-240 m/min
    Fz 0.10-0.25 mm/t
    ap
    IC (inch) 0.260
    S (inch) 0.244
    l (inch) 0.394
    R (inch) 0.047
    F (inch) 0.039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 26
    Coating PVD
    ISO Field P;M
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 140-220 m/min
    Fz 0.10-0.25 mm/t
    ap
    M 10-25
    Vc 100-160 m/min
    Fz 0.10-0.20 mm/t
    ap
    k 10-30
    Vc 160-240 m/min
    Fz 0.10-0.25 mm/t
    ap
  • 1112103G6 PLAQUITA ANHX 100412 PNER-LM PH7740 INSERT ANHX 100412 PNER-LM PH7740 Orden
  • 1112103G4 PLAQUITA ANHX 100412 PNER-LM PH7920 INSERT ANHX 100412 PNER-LM PH7920 Orden
  • 1112103P3 PLAQUITA ANHX 100412 PNER-LM PH7930 INSERT ANHX 100412 PNER-LM PH7930 Orden
  • 111210210 PLAQUITA ANHX 100412 PNR-LN PH0910 INSERT ANHX 100412 PNR-LN PH0910 Orden
  • 111190854 PLAQUITA ANHX 100412 PNR-LP PH6910 INSERT ANHX 100412 PNR-LP PH6910 Orden
    IC (mm) 6,6
    S (mm) 6,2
    l (mm) 10
    R (mm) 1,2
    F (mm) 1
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 140-240 m/min
    Fz 0.10-0.20 mm/t
    ap
    K 05-10
    Vc 150-280 m/min
    Fz 0.10-0.25 mm/t
    ap
    IC (inch) 0,260
    S (inch) 0,244
    l (inch) 0,394
    R (inch) 0,047
    F (inch) 0,039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 140-240 m/min
    Fz 0.10-0.20 mm/t
    ap
    K 05-10
    Vc 150-280 m/min
    Fz 0.10-0.25 mm/t
    ap
  • 111190868 PLAQUITA ANHX 100412 PNR-LP PH6920 INSERT ANHX 100412 PNR-LP PH6920 Orden
    IC (mm) 6,6
    S (mm) 6,2
    l (mm) 10
    R (mm) 1,2
    F (mm) 1
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 140-220 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-3.00 mm
    K 10-30
    Vc 120-260 m/min
    Fz 0.10-0.30 mm/t
    ap 1.00-3.00 mm
    IC (inch) 0,260
    S (inch) 0,244
    l (inch) 0,394
    R (inch) 0,047
    F (inch) 0,039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 140-220 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-3.00 mm
    K 10-30
    Vc 120-260 m/min
    Fz 0.10-0.30 mm/t
    ap 1.00-3.00 mm
  • 111190866 PLAQUITA ANHX 100412 PNR-LP PH6930 INSERT ANHX 100412 PNR-LP PH6930 Orden
    IC (mm) 6,6
    S (mm) 6,2
    l (mm) 10
    R (mm) 1,2
    F (mm) 1
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,M,K
    Work hand R
    las condiciones de corte
    P 20-40
    Vc
    Fz
    ap
    M 20-30
    Vc
    Fz
    ap
    K 20-40
    Vc
    Fz
    ap
    IC (inch) 0,260
    S (inch) 0,244
    l (inch) 0,394
    R (inch) 0,047
    F (inch) 0,039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,M,K
    Work hand R
    las condiciones de corte
    P 20-40
    Vc
    Fz
    ap
    M 20-30
    Vc
    Fz
    ap
    K 20-40
    Vc
    Fz
    ap
  • 1111908G1 PLAQUITA ANHX 100412 PNR-LP PH7910 INSERT ANHX 100412 PNR-LP PH7910 Orden
    IC (mm) 6,6
    S (mm) 6,2
    l (mm) 10
    R (mm) 1,2
    F (mm) 1
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 150-250 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-3.50 mm
    K 05-10
    Vc 160-280 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-3.50 mm
    IC (inch) 0,260
    S (inch) 0,244
    l (inch) 0,394
    R (inch) 0,047
    F (inch) 0,039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 150-250 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-3.50 mm
    K 05-10
    Vc 160-280 m/min
    Fz 0.10-0.20 mm/t
    ap 1.00-3.50 mm
  • 1111908G4 PLAQUITA ANHX 100412 PNR-LP PH7920 INSERT ANHX 100412 PNR-LP PH7920 Orden
    IC (mm) 6,6
    S (mm) 6,2
    l (mm) 10
    R (mm) 1,2
    F (mm) 1
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 140-220 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-5.00 mm
    K 10-30
    Vc 160-250 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-3.50 mm
    IC (inch) 0,260
    S (inch) 0,244
    l (inch) 0,394
    R (inch) 0,047
    F (inch) 0,039
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 25°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 140-220 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-5.00 mm
    K 10-30
    Vc 160-250 m/min
    Fz 0.10-0.25 mm/t
    ap 1.00-3.50 mm
  • 1111908P3 PLAQUITA ANHX 100412 PNR-LP PH7930 INSERT ANHX 100412 PNR-LP PH7930 Orden
  • 1112474G6 PLAQUITA ANHX 120604 PNER-LS PH7740 INSERT ANHX 120604 PNER-LS PH7740 Orden
  • 1112474G4 PLAQUITA ANHX 120604 PNER-LS PH7920 INSERT ANHX 120604 PNER-LS PH7920 Orden
  • 1112474P3 PLAQUITA ANHX 120604 PNER-LS PH7930 INSERT ANHX 120604 PNER-LS PH7930 Orden
  • 1112473L6 PLAQUITA ANHX 120604 PNSR-MP PH5320 INSERT ANHX 120604 PNSR-MP PH5320 Orden
  • 1112473G6 PLAQUITA ANHX 120604 PNSR-MP PH7740 INSERT ANHX 120604 PNSR-MP PH7740 Orden
  • 1112473G4 PLAQUITA ANHX 120604 PNSR-MP PH7920 INSERT ANHX 120604 PNSR-MP PH7920 Orden
  • 1112237G6 PLAQUITA ANHX 120608 PNER-LS PH7740 INSERT ANHX 120608 PNER-LS PH7740 Orden
  • 1112237G4 PLAQUITA ANHX 120608 PNER-LS PH7920 INSERT ANHX 120608 PNER-LS PH7920 Orden
  • 1112237P3 PLAQUITA ANHX 120608 PNER-LS PH7930 INSERT ANHX 120608 PNER-LS PH7930 Orden
  • 1112238L6 PLAQUITA ANHX 120608 PNSR-MP PH5320 INSERT ANHX 120608 PNSR-MP PH5320 Orden
  • 1112238G6 PLAQUITA ANHX 120608 PNSR-MP PH7740 INSERT ANHX 120608 PNSR-MP PH7740 Orden
  • 1112238G4 PLAQUITA ANHX 120608 PNSR-MP PH7920 INSERT ANHX 120608 PNSR-MP PH7920 Orden
  • 1112238P3 PLAQUITA ANHX 120608 PNSR-MP PH7930 INSERT ANHX 120608 PNSR-MP PH7930 Orden
  • 1112429G6 PLAQUITA ANHX 120616 PNER-LS PH7740 INSERT ANHX 120616 PNER-LS PH7740 Orden
  • 1112429P3 PLAQUITA ANHX 120616 PNER-LS PH7930 INSERT ANHX 120616 PNER-LS PH7930 Orden
  • 1112430L6 PLAQUITA ANHX 120616 PNSR-MP PH5320 INSERT ANHX 120616 PNSR-MP PH5320 Orden
  • 1112430G6 PLAQUITA ANHX 120616 PNSR-MP PH7740 INSERT ANHX 120616 PNSR-MP PH7740 Orden
  • 1112430G4 PLAQUITA ANHX 120616 PNSR-MP PH7920 INSERT ANHX 120616 PNSR-MP PH7920 Orden
  • 1112430P3 PLAQUITA ANHX 120616 PNSR-MP PH7930 INSERT ANHX 120616 PNSR-MP PH7930 Orden
  • 1111595D2 PLAQUITA ANHX 160708 PNER-MP PH6705 INSERT ANHX 160708 PNER-MP PH6705 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 0,8
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field K
    Work hand R
    las condiciones de corte
    K 05-15
    Vc
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,031
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field K
    Work hand R
    las condiciones de corte
    K 05-15
    Vc
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
  • 111159554 PLAQUITA ANHX 160708 PNER-MP PH6910 INSERT ANHX 160708 PNER-MP PH6910 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 0,8
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 150-350 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 05-10
    Vc 120-330 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 05-10
    Vc 90-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    N 05-15
    Vc 40-90 m/min
    Fz 0,10-0,12 mm/r
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,031
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 150-350 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 05-10
    Vc 120-330 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 05-10
    Vc 90-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    N 05-15
    Vc 40-90 m/min
    Fz 0,10-0,12 mm/r
    ap 15,00 mm
  • 111159568 PLAQUITA ANHX 160708 PNER-MP PH6920 INSERT ANHX 160708 PNER-MP PH6920 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 0,8
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 150-250 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 10-25
    Vc 120-230 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 01-30
    Vc 80-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    N 10-30
    Vc 35-80 m/min
    Fz 0,10-0,12 mm/r
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,031
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 150-250 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 10-25
    Vc 120-230 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 01-30
    Vc 80-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    N 10-30
    Vc 35-80 m/min
    Fz 0,10-0,12 mm/r
    ap 15,00 mm
  • 111159566 PLAQUITA ANHX 160708 PNER-MP PH6930 INSERT ANHX 160708 PNER-MP PH6930 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 0,8
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field P,M,K
    Work hand R
    las condiciones de corte
    P 20-40
    Vc 100-250 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 20-30
    Vc 100-200 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 20-40
    Vc 80-250 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,031
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field P,M,K
    Work hand R
    las condiciones de corte
    P 20-40
    Vc 100-250 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 20-30
    Vc 100-200 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 20-40
    Vc 80-250 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
  • 1111595G1 PLAQUITA ANHX 160708 PNER-MP PH7910 INSERT ANHX 160708 PNER-MP PH7910 Orden
  • 1111595G4 PLAQUITA ANHX 160708 PNER-MP PH7920 INSERT ANHX 160708 PNER-MP PH7920 Orden
  • 1111595P3 PLAQUITA ANHX 160708 PNER-MP PH7930 INSERT ANHX 160708 PNER-MP PH7930 Orden
  • 111165910 PLAQUITA ANHX 160708 PNFR-LN PH0910 INSERT ANHX 160708 PNFR-LN PH0910 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 0,8
    Z efective cutting edge 4
    Tolerance Class Insert H
    Coating UNCOATED
    ISO Field N
    Work hand R
    las condiciones de corte
    N 01-20
    Vc
    Fz
    ap
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,031
    Z efective cutting edge 4
    Tolerance Class Insert H
    Coating UNCOATED
    ISO Field N
    Work hand R
    las condiciones de corte
    N 01-20
    Vc
    Fz
    ap
  • 1111519D2 PLAQUITA ANHX 160708 PNR-LP PH6705 INSERT ANHX 160708 PNR-LP PH6705 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 0,8
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field K
    Work hand R
    las condiciones de corte
    K 05-15
    Vc 100-300 m/min
    Fz
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,031
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field K
    Work hand R
    las condiciones de corte
    K 05-15
    Vc 100-300 m/min
    Fz
    ap 15,00 mm
  • 111151954 PLAQUITA ANHX 160708 PNR-LP PH6910 INSERT ANHX 160708 PNR-LP PH6910 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 0,8
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 150-350 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 05-10
    Vc 120-330 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 05-10
    Vc 90-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    N 05-15
    Vc 40-90 m/min
    Fz 0,10-0,12 mm/r
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,031
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 150-350 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 05-10
    Vc 120-330 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 05-10
    Vc 90-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    N 05-15
    Vc 40-90 m/min
    Fz 0,10-0,12 mm/r
    ap 15,00 mm
  • 111151968 PLAQUITA ANHX 160708 PNR-LP PH6920 INSERT ANHX 160708 PNR-LP PH6920 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 0,8
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc
    Fz
    ap
    M 10-25
    Vc
    Fz
    ap
    K 01-30
    Vc
    Fz
    ap
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,031
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc
    Fz
    ap
    M 10-25
    Vc
    Fz
    ap
    K 01-30
    Vc
    Fz
    ap
  • 111151966 PLAQUITA ANHX 160708 PNR-LP PH6930 INSERT ANHX 160708 PNR-LP PH6930 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 0,8
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field P,M,K
    Work hand R
    las condiciones de corte
    P 20-40
    Vc 100-250 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 20-30
    Vc 100-200 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 20-40
    Vc 80-250 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,031
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field P,M,K
    Work hand R
    las condiciones de corte
    P 20-40
    Vc 100-250 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 20-30
    Vc 100-200 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 20-40
    Vc 80-250 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
  • 1111519G1 PLAQUITA ANHX 160708 PNR-LP PH7910 INSERT ANHX 160708 PNR-LP PH7910 Orden
  • 1111519g4 PLAQUITA ANHX 160708 PNR-LP PH7920 INSERT ANHX 160708 PNR-LP PH7920 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 0,8
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field K
    Work hand R
    las condiciones de corte
    P 10-35
    Vc
    Fz
    ap
    M 10-25
    Vc
    Fz
    ap
    K 10-30
    Vc
    Fz
    ap
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,031
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field K
    Work hand R
    las condiciones de corte
    P 10-35
    Vc
    Fz
    ap
    M 10-25
    Vc
    Fz
    ap
    K 10-30
    Vc
    Fz
    ap
  • 1111519P3 PLAQUITA ANHX 160708 PNR-LP PH7930 INSERT ANHX 160708 PNR-LP PH7930 Orden
  • 1111596D2 PLAQUITA ANHX 160712 PNER-LP PH6705 INSERT ANHX 160712 PNER-LP PH6705 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 1,2
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field K
    Work hand R
    las condiciones de corte
    K 05-15
    Vc 100-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,047
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field K
    Work hand R
    las condiciones de corte
    K 05-15
    Vc 100-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
  • 111159654 PLAQUITA ANHX 160712 PNER-LP PH6910 INSERT ANHX 160712 PNER-LP PH6910 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 1,2
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 150-350 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 05-10
    Vc 120-330 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 05-10
    Vc 90-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    N 05-15
    Vc 40-90 m/min
    Fz 0,10-0,12 mm/r
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,047
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc 150-350 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 05-10
    Vc 120-330 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 05-10
    Vc 90-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    N 05-15
    Vc 40-90 m/min
    Fz 0,10-0,12 mm/r
    ap 15,00 mm
  • 111159668 PLAQUITA ANHX 160712 PNER-LP PH6920 INSERT ANHX 160712 PNER-LP PH6920 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 1,2
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 150-250 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 10-25
    Vc 120-230 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 01-30
    Vc 80-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    N 10-30
    Vc 35-80 m/min
    Fz 0,10-0,12 mm/r
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,047
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 150-250 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 10-25
    Vc 120-230 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 01-30
    Vc 80-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    N 10-30
    Vc 35-80 m/min
    Fz 0,10-0,12 mm/r
    ap 15,00 mm
  • 111159666 PLAQUITA ANHX 160712 PNER-LP PH6930 INSERT ANHX 160712 PNER-LP PH6930 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 1,2
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field P,M,K
    Work hand R
    las condiciones de corte
    P 20-40
    Vc 100-250 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 20-30
    Vc 100-200 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 20-40
    Vc 80-250 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,047
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 29°
    Coating PVD
    ISO Field P,M,K
    Work hand R
    las condiciones de corte
    P 20-40
    Vc 100-250 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 20-30
    Vc 100-200 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 20-40
    Vc 80-250 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
  • 1111596G1 PLAQUITA ANHX 160712 PNER-LP PH7910 INSERT ANHX 160712 PNER-LP PH7910 Orden
  • 1111596G4 PLAQUITA ANHX 160712 PNER-LP PH7920 INSERT ANHX 160712 PNER-LP PH7920 Orden
  • 1111596P3 PLAQUITA ANHX 160712 PNER-LP PH7930 INSERT ANHX 160712 PNER-LP PH7930 Orden
  • 1111598D2 PLAQUITA ANHX 160712 PNER-MP PH6705 INSERT ANHX 160712 PNER-MP PH6705 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 1,2
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field K
    Work hand R
    las condiciones de corte
    K 05-15
    Vc
    Fz
    ap
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,047
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field K
    Work hand R
    las condiciones de corte
    K 05-15
    Vc
    Fz
    ap
  • 111159854 PLAQUITA ANHX 160712 PNER-MP PH6910 INSERT ANHX 160712 PNER-MP PH6910 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 1,2
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc
    Fz
    ap
    M 05-10
    Vc
    Fz
    ap
    K 05-10
    Vc
    Fz
    ap
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,047
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field P,K,S
    Work hand R
    las condiciones de corte
    P 05-10
    Vc
    Fz
    ap
    M 05-10
    Vc
    Fz
    ap
    K 05-10
    Vc
    Fz
    ap
  • 111159868 PLAQUITA ANHX 160712 PNER-MP PH6920 INSERT ANHX 160712 PNER-MP PH6920 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 1,2
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 150-250 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 10-25
    Vc 120-230 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 01-30
    Vc 80-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    N 10-30
    Vc 35-80 m/min
    Fz 0,10-0,12 mm/r
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,047
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field P,M,K,S
    Work hand R
    las condiciones de corte
    P 10-35
    Vc 150-250 m/min
    Fz 0,10-0,25 mm/t
    ap 15,00 mm
    M 10-25
    Vc 120-230 m/min
    Fz 0,10-0,20 mm/r
    ap 15,00 mm
    K 01-30
    Vc 80-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    N 10-30
    Vc 35-80 m/min
    Fz 0,10-0,12 mm/r
    ap 15,00 mm
  • 111159866 PLAQUITA ANHX 160712 PNER-MP PH6930 INSERT ANHX 160712 PNER-MP PH6930 Orden
    IC (mm) 11,2
    S (mm) 10,8
    l (mm) 16
    R (mm) 1,2
    F (mm) 1,4
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field P,M,K
    Work hand R
    las condiciones de corte
    P 20-40
    Vc
    Fz
    ap
    M 20-30
    Vc
    Fz
    ap
    K 20-40
    Vc
    Fz
    ap
    IC (inch) 0,441
    S (inch) 0,425
    l (inch) 0,630
    R (inch) 0,047
    F (inch) 0,055
    Z efective cutting edge 4
    Tolerance Class Insert H
    Cutting Rake (°) 27°
    Coating PVD
    ISO Field P,M,K
    Work hand R
    las condiciones de corte
    P 20-40
    Vc
    Fz
    ap
    M 20-30
    Vc
    Fz
    ap
    K 20-40
    Vc
    Fz
    ap
  • 1111598G1 PLAQUITA ANHX 160712 PNER-MP PH7910 INSERT ANHX 160712 PNER-MP PH7910 Orden
  • 1111598G4 PLAQUITA ANHX 160712 PNER-MP PH7920 INSERT ANHX 160712 PNER-MP PH7920 Orden
  • 1111598P3 PLAQUITA ANHX 160712 PNER-MP PH7930 INSERT ANHX 160712 PNER-MP PH7930 Orden
  • 111159710 PLAQUITA ANHX 160712 PNFR-LN PH0910 INSERT ANHX 160712 PNFR-LN PH0910 Orden
    IC (mm) 11,2
    S (mm) 10,5
    l (mm) 16
    R (mm) 1,2
    Z efective cutting edge 4
    Tolerance Class Insert H
    Coating UNCOATED
    ISO Field N
    Work hand R
    las condiciones de corte
    K
    Vc
    Fz
    ap
    N 01-20
    Vc 90-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
    IC (inch) 0,441
    S (inch) 0,413
    l (inch) 0,630
    R (inch) 0,047
    Z efective cutting edge 4
    Tolerance Class Insert H
    Coating UNCOATED
    ISO Field N
    Work hand R
    las condiciones de corte
    K
    Vc
    Fz
    ap
    N 01-20
    Vc 90-300 m/min
    Fz 0,10-0,25 mm/r
    ap 15,00 mm
Para entrar en contacto con nuestros representantes
El correo electrónico no es válido