Homepage / Products / Cutting Tools / Inserts / Turning Inserts / CNMM
Products

CNMM

Search products:

References available
Available scales
Millimeters
Inches
  • Order Code Reference
  • 1124054R2 INSERT CNMM 160608-RP PHG115 INSERT CNMM 542-RP PHG115 Order
  • 1124054R3 INSERT CNMM 160608-RP PHG125 INSERT CNMM 542-RP PHG125 Order
  • 1124055R2 INSERT CNMM 160612-RP PHG115 INSERT CNMM 543-RP PHG115 Order
  • 1124055R3 INSERT CNMM 160612-RP PHG125 INSERT CNMM 543-RP PHG125 Order
  • 1124056R2 INSERT CNMM 160616-RP PHG115 INSERT CNMM 544-RP PHG115 Order
  • 1124056R3 INSERT CNMM 160616-RP PHG125 INSERT CNMM 544-RP PHG125 Order
  • 1121608L7 INSERT CNMM 190612-HY PH5115 INSERT CNMM 643-HY PH5115 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,2
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 01-30
    Vc 125-277
    410-909     m/min
    sfm
    Fz 0.35-0.80
    0.0138-0.0315     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0472
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 01-30
    Vc 125-277
    410-909     m/min
    sfm
    Fz 0.35-0.80
    0.0138-0.0315     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
  • 1121608L8 INSERT CNMM 190612-HY PH5125 INSERT CNMM 643-HY PH5125 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,2
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 10-35
    Vc 116-251
    381-823     m/min
    sfm
    Fz 0.35-0.80
    0.0138-0.0315     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 05-30
    Vc 110-231
    361-758     m/min
    sfm
    Fz 0.35-0.80
    0.0138-0.0315     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0472
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 10-35
    Vc 116-251
    381-823     m/min
    sfm
    Fz 0.35-0.80
    0.0138-0.0315     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 05-30
    Vc 110-231
    361-758     m/min
    sfm
    Fz 0.35-0.80
    0.0138-0.0315     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
  • 1121608L9 INSERT CNMM 190612-HY PH5740 INSERT CNMM 643-HY PH5740 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,2
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 25-45
    Vc 103-208
    338-682     m/min
    sfm
    Fz 0.35-0.80
    0.0138-0.0315     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 25-45
    Vc 98-191
    322-627     m/min
    sfm
    Fz 0.35-0.80
    0.0138-0.0315     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0472
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 25-45
    Vc 103-208
    338-682     m/min
    sfm
    Fz 0.35-0.80
    0.0138-0.0315     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 25-45
    Vc 98-191
    322-627     m/min
    sfm
    Fz 0.35-0.80
    0.0138-0.0315     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
  • 1121607L7 INSERT CNMM 190612-HZ PH5115 INSERT CNMM 643-HZ PH5115 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,2
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 01-30
    Vc 125-272
    410-892     m/min
    sfm
    Fz 0.50-0.80
    0.0197-0.0315     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0472
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 01-30
    Vc 125-272
    410-892     m/min
    sfm
    Fz 0.50-0.80
    0.0197-0.0315     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
  • 1121607L8 INSERT CNMM 190612-HZ PH5125 INSERT CNMM 643-HZ PH5125 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,2
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 10-35
    Vc 116-246
    381-807     m/min
    sfm
    Fz 0.50-0.80
    0.0197-0.0315     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0472
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 10-35
    Vc 116-246
    381-807     m/min
    sfm
    Fz 0.50-0.80
    0.0197-0.0315     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
  • 1121607L6 INSERT CNMM 190612-HZ PH5320 INSERT CNMM 643-HZ PH5320 Order
    Coating CVD-MT
    D (mm) 19,05
    d1 (mm) 8,0
    S (mm) 6,35
    cutting conditions
    P 05-25
    Vc 140-300
    459-984     m/min
    sfm
    Fz 0.50-0.80
    0.0197-0.0315     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.472     mm
    in
    K 05-25
    Vc 155-342
    509-1121     m/min.
    sfm
    Fz 0.50-0.80
    0.0197-0.0315     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.472     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    d1 (inch) 0,313
    S (inch) 0,25
    cutting conditions
    P 05-25
    Vc 140-300
    459-984     m/min
    sfm
    Fz 0.50-0.80
    0.0197-0.0315     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.472     mm
    in
    K 05-25
    Vc 155-342
    509-1121     m/min.
    sfm
    Fz 0.50-0.80
    0.0197-0.0315     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.472     mm
    in
  • 1121607L9 INSERT CNMM 190612-HZ PH5740 INSERT CNMM 643-HZ PH5740 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,2
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 25-45
    Vc 103-204
    338-669     m/min
    sfm
    Fz 0.50-0.80
    0.0197-0.0315     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0472
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 25-45
    Vc 103-204
    338-669     m/min
    sfm
    Fz 0.50-0.80
    0.0197-0.0315     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
  • 1124000L7 INSERT CNMM 190612-RP PH5115 INSERT CNMM 643-RP PH5115 Order
    Coating Coating
    Re (mm) Re (mm)
    d1 (mm) d1 (mm)
    D (mm) D (mm)
    S (mm) S (mm)
    cutting conditions
    P 01-30
    Vc 125-272 m/min.
    Fz 0.50-0.80 mm/r
    ap 2.40-12.00 mm
    Coating Coating
    Re (inch) Re (inch)
    S (inch) S (inch)
    D (inch) D (inch)
    d1 (inch) d1 (inch)
    cutting conditions
    P 01-30
    Vc 125-272 m/min.
    Fz 0.50-0.80 mm/r
    ap 2.40-12.00 mm
  • 1124000L8 INSERT CNMM 190612-RP PH5125 INSERT CNMM 643-RP PH5125 Order
    Coating Coating
    Re (mm) Re (mm)
    d1 (mm) d1 (mm)
    D (mm) D (mm)
    S (mm) S (mm)
    cutting conditions
    P 10-35
    Vc 115-250 m/min.
    Fz 0.50-0.80 mm/r
    ap 2.40-12.00 mm
    Coating Coating
    Re (inch) Re (inch)
    S (inch) S (inch)
    D (inch) D (inch)
    d1 (inch) d1 (inch)
    cutting conditions
    P 10-35
    Vc 115-250 m/min.
    Fz 0.50-0.80 mm/r
    ap 2.40-12.00 mm
  • 1121641L8 INSERT CNMM 190616-HS PH5125 INSERT CNMM 644HS PH5125 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,6
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 10-35
    Vc 114-251
    374-823     m/min
    sfm
    Fz 0.35-0.90
    0.0138-0.0354     mm/r
    in/r
    ap 1.80-12.00
    0.0709-0.4724     mm
    in
    M 05-30
    Vc 108-231
    354-758     m/min
    sfm
    Fz 0.35-0.90
    0.0138-0.0354     mm/r
    in/r
    ap 1.80-12.00
    0.0709-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,063
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 10-35
    Vc 114-251
    374-823     m/min
    sfm
    Fz 0.35-0.90
    0.0138-0.0354     mm/r
    in/r
    ap 1.80-12.00
    0.0709-0.4724     mm
    in
    M 05-30
    Vc 108-231
    354-758     m/min
    sfm
    Fz 0.35-0.90
    0.0138-0.0354     mm/r
    in/r
    ap 1.80-12.00
    0.0709-0.4724     mm
    in
  • 1121252L7 INSERT CNMM 190616-HY PH5115 INSERT CNMM 644-HY PH5115 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,6
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 01-30
    Vc 122-277
    400-909     m/min
    sfm
    Fz 0.35-1.00
    0.0138-0.0394     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,063
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 01-30
    Vc 122-277
    400-909     m/min
    sfm
    Fz 0.35-1.00
    0.0138-0.0394     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
  • 1121252L8 INSERT CNMM 190616-HY PH5125 INSERT CNMM 644-HY PH5125 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,6
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 10-35
    Vc 114-251
    374-823     m/min
    sfm
    Fz 0.35-1.00
    0.0138-0.0394     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 05-30
    Vc 108-231
    354-758     m/min
    sfm
    Fz 0.35-1.00
    0.0138-0.0394     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,063
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 10-35
    Vc 114-251
    374-823     m/min
    sfm
    Fz 0.35-1.00
    0.0138-0.0394     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 05-30
    Vc 108-231
    354-758     m/min
    sfm
    Fz 0.35-1.00
    0.0138-0.0394     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
  • 1121252L9 INSERT CNMM 190616-HY PH5740 INSERT CNMM 644-HY PH5740 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,6
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 25-45
    Vc 101-208
    331-682     m/min
    sfm
    Fz 0.35-1.00
    0.0138-0.0394     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 25-45
    Vc 96-191
    315-627     m/min
    sfm
    Fz 0.35-1.00
    0.0138-0.0394     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,063
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 25-45
    Vc 101-208
    331-682     m/min
    sfm
    Fz 0.35-1.00
    0.0138-0.0394     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 25-45
    Vc 96-191
    315-627     m/min
    sfm
    Fz 0.35-1.00
    0.0138-0.0394     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
  • 1121251L7 INSERT CNMM 190616-HZ PH5115 INSERT CNMM 644-HZ PH5115 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,6
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 01-30
    Vc 122-272
    400-892     m/min
    sfm
    Fz 0.50-1.10
    0.0197-0.0433     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,063
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 01-30
    Vc 122-272
    400-892     m/min
    sfm
    Fz 0.50-1.10
    0.0197-0.0433     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
  • 1121251L8 INSERT CNMM 190616-HZ PH5125 INSERT CNMM 644-HZ PH5125 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,6
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 10-35
    Vc 114-246
    374-807     m/min
    sfm
    Fz 0.50-1.10
    0.0197-0.0433     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,063
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 10-35
    Vc 114-246
    374-807     m/min
    sfm
    Fz 0.50-1.10
    0.0197-0.0433     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
  • 1121251L6 INSERT CNMM 190616-HZ PH5320 INSERT CNMM 644-HZ PH5320 Order
    Coating CVD-MT
    D (mm) 19,05
    d1 (mm) 8,0
    S (mm) 6,35
    cutting conditions
    K 01-25
    Vc 140-250
    459-820     m/min.
    sfm
    Fz 0.50-1.10
    0.0197-0.0433     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    d1 (inch) 0,313
    S (inch) 0,25
    cutting conditions
    K 01-25
    Vc 140-250
    459-820     m/min.
    sfm
    Fz 0.50-1.10
    0.0197-0.0433     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
  • 1121251L9 INSERT CNMM 190616-HZ PH5740 INSERT CNMM 644-HZ PH5740 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 1,6
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 25-45
    Vc 101-204
    331-669     m/min
    sfm
    Fz 0.50-1.10
    0.0197-0.0433     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,063
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 25-45
    Vc 101-204
    331-669     m/min
    sfm
    Fz 0.50-1.10
    0.0197-0.0433     mm/r
    in/r
    ap 2.40-12.00
    0.0945-0.4724     mm
    in
  • 1123999L7 INSERT CNMM 190616-RP PH5115 INSERT CNMM 644-RP PH5115 Order
    Coating Coating
    Re (mm) Re (mm)
    d1 (mm) d1 (mm)
    D (mm) D (mm)
    S (mm) S (mm)
    Coating Coating
    Re (inch) Re (inch)
    S (inch) S (inch)
    D (inch) D (inch)
    d1 (inch) d1 (inch)
  • 1123999L8 INSERT CNMM 190616-RP PH5125 INSERT CNMM 644-RP PH5125 Order
    Coating Coating
    Re (mm) Re (mm)
    d1 (mm) d1 (mm)
    D (mm) D (mm)
    S (mm) S (mm)
    Coating Coating
    Re (inch) Re (inch)
    S (inch) S (inch)
    D (inch) D (inch)
    d1 (inch) d1 (inch)
  • 1121600L8 INSERT CNMM 190624-HS PH5125 INSERT CNMM 646-HS PH5125 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 2,4
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 10-35
    Vc 113-251
    371-823     m/min
    sfm
    Fz 0.40-1.20
    0.0157-0.0472     mm/r
    in/r
    ap 2.50-12.00
    0.0984-0.4724     mm
    in
    M 05-30
    Vc 107-231
    351-758     m/min
    sfm
    Fz 0.40-1.20
    0.0157-0.0472     mm/r
    in/r
    ap 2.50-12.00
    0.0984-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0945
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 10-35
    Vc 113-251
    371-823     m/min
    sfm
    Fz 0.40-1.20
    0.0157-0.0472     mm/r
    in/r
    ap 2.50-12.00
    0.0984-0.4724     mm
    in
    M 05-30
    Vc 107-231
    351-758     m/min
    sfm
    Fz 0.40-1.20
    0.0157-0.0472     mm/r
    in/r
    ap 2.50-12.00
    0.0984-0.4724     mm
    in
  • 1121434L7 INSERT CNMM 190624-HY PH5115 INSERT CNMM 646-HY PH5115 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 2,4
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 01-30
    Vc 121-277
    397-909     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0945
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 01-30
    Vc 121-277
    397-909     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
  • 1121434L8 INSERT CNMM 190624-HY PH5125 INSERT CNMM 646-HY PH5125 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 2,4
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 10-35
    Vc 113-251
    371-823     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 05-30
    Vc 107-231
    351-758     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0945
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 10-35
    Vc 113-251
    371-823     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 05-30
    Vc 107-231
    351-758     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
  • 1121434L9 INSERT CNMM 190624-HY PH5740 INSERT CNMM 646-HY PH5740 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 2,4
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 25-45
    Vc 100-208
    328-682     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 25-45
    Vc 95-191
    312-627     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0945
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 25-45
    Vc 100-208
    328-682     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 25-45
    Vc 95-191
    312-627     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
  • 1121435L7 INSERT CNMM 190624-HZ PH5115 INSERT CNMM 646-HZ PH5115 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 2,4
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 01-30
    Vc 118-272
    387-892     m/min
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap 3.20-12.00
    0.126-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0945
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 01-30
    Vc 118-272
    387-892     m/min
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap 3.20-12.00
    0.126-0.4724     mm
    in
  • 1121435L8 INSERT CNMM 190624-HZ PH5125 INSERT CNMM 646-HZ PH5125 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 2,4
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 10-35
    Vc 110-246
    361-807     m/min
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap 3.20-12.00
    0.126-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0945
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 10-35
    Vc 110-246
    361-807     m/min
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap 3.20-12.00
    0.126-0.4724     mm
    in
  • 1121435L6 INSERT CNMM 190624-HZ PH5320 INSERT CNMM 646-HZ PH5320 Order
    Coating CVD-MT
    D (mm) 19,05
    d1 (mm) 8,0
    S (mm) 6,35
    cutting conditions
    P 05-15
    Vc 118-272
    387-892     m/min.
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap
    0.126-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    d1 (inch) 0,313
    S (inch) 0,25
    cutting conditions
    P 05-15
    Vc 118-272
    387-892     m/min.
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap
    0.126-0.4724     mm
    in
  • 1121435L9 INSERT CNMM 190624-HZ PH5740 INSERT CNMM 646-HZ PH5740 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 2,4
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 25-45
    Vc 98-204
    322-669     m/min
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap 3.20-12.00
    0.126-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0945
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 25-45
    Vc 98-204
    322-669     m/min
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap 3.20-12.00
    0.126-0.4724     mm
    in
  • 1123676L7 INSERT CNMM 190624-RP PH5115 INSERT CNMM 646-RP PH5115 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 2,4
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 01-30
    Vc 121-277
    397-909     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 01-25
    Vc 115-255
    377-837     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0945
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 01-30
    Vc 121-277
    397-909     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 01-25
    Vc 115-255
    377-837     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
  • 1123676L8 INSERT CNMM 190624-RP PH5125 INSERT CNMM 646-RP PH5125 Order
    Coating CVD-MT
    D (mm) 19,05
    Re (mm) 2,4
    d1 (mm) 7,94
    S (mm) 6,35
    cutting conditions
    P 10-35
    Vc 113-251
    371-823     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 05-30
    Vc 107-231
    351-758     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    Coating CVD-MT
    D (inch) 0,75
    Re (inch) 0,0945
    d1 (inch) 0,3126
    S (inch) 0,25
    cutting conditions
    P 10-35
    Vc 113-251
    371-823     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
    M 05-30
    Vc 107-231
    351-758     m/min
    sfm
    Fz 0.35-1.20
    0.0138-0.0472     mm/r
    in/r
    ap 2.00-12.00
    0.0787-0.4724     mm
    in
  • 1121645L8 INSERT CNMM 250924-HS PH5125 INSERT CNMM 866HS PH5125 Order
    Coating CVD-MT
    D (mm) 25,4
    Re (mm) 2,4
    d1 (mm) 9,12
    S (mm) 9,52
    cutting conditions
    P 10-35
    Vc 111-246
    364-807     m/min
    sfm
    Fz 0.45-1.40
    0.0177-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
    M 05-30
    Vc 106-231
    348-758     m/min
    sfm
    Fz 0.45-1.40
    0.0177-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
    Coating CVD-MT
    D (inch) 1
    Re (inch) 0,0945
    d1 (inch) 0,3591
    S (inch) 0,3748
    cutting conditions
    P 10-35
    Vc 111-246
    364-807     m/min
    sfm
    Fz 0.45-1.40
    0.0177-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
    M 05-30
    Vc 106-231
    348-758     m/min
    sfm
    Fz 0.45-1.40
    0.0177-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
  • 1121248L7 INSERT CNMM 250924-HY PH5115 INSERT CNMM 866-HY PH5115 Order
    Coating CVD-MT
    D (mm) 25,4
    Re (mm) 2,4
    d1 (mm) 9,12
    S (mm) 9,52
    cutting conditions
    P 01-30
    Vc 120-277
    394-909     m/min
    sfm
    Fz 0.40-1.40
    0.0157-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
    Coating CVD-MT
    D (inch) 1
    Re (inch) 0,0945
    d1 (inch) 0,3591
    S (inch) 0,3748
    cutting conditions
    P 01-30
    Vc 120-277
    394-909     m/min
    sfm
    Fz 0.40-1.40
    0.0157-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
  • 1121248L8 INSERT CNMM 250924-HY PH5125 INSERT CNMM 866-HY PH5125 Order
    Coating CVD-MT
    D (mm) 25,4
    Re (mm) 2,4
    d1 (mm) 9,12
    S (mm) 9,52
    cutting conditions
    P 10-35
    Vc 111-251
    364-823     m/min
    sfm
    Fz 0.40-1.40
    0.0157-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
    M 05-30
    Vc 106-231
    348-758     m/min
    sfm
    Fz 0.40-1.40
    0.0157-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
    Coating CVD-MT
    D (inch) 1
    Re (inch) 0,0945
    d1 (inch) 0,3591
    S (inch) 0,3748
    cutting conditions
    P 10-35
    Vc 111-251
    364-823     m/min
    sfm
    Fz 0.40-1.40
    0.0157-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
    M 05-30
    Vc 106-231
    348-758     m/min
    sfm
    Fz 0.40-1.40
    0.0157-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
  • 1121248L9 INSERT CNMM 250924-HY PH5740 INSERT CNMM 866-HY PH5740 Order
    Coating CVD-MT
    D (mm) 25,4
    Re (mm) 2,4
    d1 (mm) 9,12
    S (mm) 9,52
    cutting conditions
    P 25-45
    Vc 99-208
    325-682     m/min
    sfm
    Fz 0.40-1.40
    0.0157-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
    M 25-45
    Vc 94-191
    308-627     m/min
    sfm
    Fz 0.40-1.40
    0.0157-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
    Coating CVD-MT
    D (inch) 1
    Re (inch) 0,0945
    d1 (inch) 0,3591
    S (inch) 0,3748
    cutting conditions
    P 25-45
    Vc 99-208
    325-682     m/min
    sfm
    Fz 0.40-1.40
    0.0157-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
    M 25-45
    Vc 94-191
    308-627     m/min
    sfm
    Fz 0.40-1.40
    0.0157-0.0551     mm/r
    in/r
    ap 2.50-15.00
    0.0984-0.5906     mm
    in
  • 1121247L7 INSERT CNMM 250924-HZ PH5115 INSERT CNMM 866-HZ PH5115 Order
    Coating CVD-MT
    D (mm) 25,4
    Re (mm) 2,4
    d1 (mm) 9,12
    S (mm) 9,52
    cutting conditions
    P 01-30
    Vc 118-272
    387-892     m/min
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap 3.20-17.00
    0.126-0.6693     mm
    in
    Coating CVD-MT
    D (inch) 1
    Re (inch) 0,0945
    d1 (inch) 0,3591
    S (inch) 0,3748
    cutting conditions
    P 01-30
    Vc 118-272
    387-892     m/min
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap 3.20-17.00
    0.126-0.6693     mm
    in
  • 1121247L8 INSERT CNMM 250924-HZ PH5125 INSERT CNMM 866-HZ PH5125 Order
    Coating CVD-MT
    D (mm) 25,4
    Re (mm) 2,4
    d1 (mm) 9,12
    S (mm) 9,52
    cutting conditions
    P 10-35
    Vc 110-246
    361-807     m/min
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap 3.20-17.00
    0.126-0.6693     mm
    in
    Coating CVD-MT
    D (inch) 1
    Re (inch) 0,0945
    d1 (inch) 0,3591
    S (inch) 0,3748
    cutting conditions
    P 10-35
    Vc 110-246
    361-807     m/min
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap 3.20-17.00
    0.126-0.6693     mm
    in
  • 1121247L6 INSERT CNMM 250924-HZ PH5320 INSERT CNMM 866-HZ PH5320 Order
    Coating CVD-MT
    D (mm) 25,4
    d1 (mm) 9,1
    S (mm) 9,52
    cutting conditions
    K 01-25
    Vc 110-330
    361-1090     m/min
    sfm
    Fz 0.60-1.60
    0.023-0.063     mm/re
    in/r
    ap 3.20-17.00
    0.126-0.700     mm
    in
    Coating CVD-MT
    D (inch) 1
    d1 (inch) 0,359
    S (inch) 0,375
    cutting conditions
    K 01-25
    Vc 110-330
    361-1090     m/min
    sfm
    Fz 0.60-1.60
    0.023-0.063     mm/re
    in/r
    ap 3.20-17.00
    0.126-0.700     mm
    in
  • 1121247L9 INSERT CNMM 250924-HZ PH5740 INSERT CNMM 866-HZ PH5740 Order
    Coating CVD-MT
    D (mm) 25,4
    Re (mm) 2,4
    d1 (mm) 9,12
    S (mm) 9,52
    cutting conditions
    P 25-45
    Vc 98-204
    322-669     m/min
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap 3.20-17.00
    0.126-0.6693     mm
    in
    Coating CVD-MT
    D (inch) 1
    Re (inch) 0,0945
    d1 (inch) 0,3591
    S (inch) 0,3748
    cutting conditions
    P 25-45
    Vc 98-204
    322-669     m/min
    sfm
    Fz 0.60-1.60
    0.0236-0.063     mm/r
    in/r
    ap 3.20-17.00
    0.126-0.6693     mm
    in
related products
To get in touch with our representatives
The email is not valid
Ok Cancel